Texas-instruments TMS320C645x DSP Manuel d'utilisateur télécharger pdf (Page 72)

www.ti.com

4.7 MDIO Link Status Change Interrupt (Masked) Register (LINKINTMASKED)

MDIO Registers

The MDIO link status change interrupt (masked) register (LINKINTMASKED) is shown in Figure 21 and

described in Table 20 .

Figure 21. MDIO Link Status Change Interrupt (Masked) Register (LINKINTMASKED)

31 16

Reserved

R-0

15 2 1 0

Reserved LINKINT

MASKED

R-0 R/WC-0

LEGEND: R = Read only; R/WC = Read/Write 1 to clear; - n = value after reset

Table 20. MDIO Link Status Change Interrupt (Masked) Register (LINKINTMASKED) Field

Descriptions

Bit Field Value Description

31-2 Reserved 0 Reserved

1-0 LINKINTMASKED MDIO Link change interrupt, masked value. . When asserted, a bit indicates that there was an

MDIO link change event (i.e. change in the LINK register) corresponding to the PHY address in the

USERPHYSEL register and the corresponding LINKINTENB bit was set. LINKINTRAW[0] and

LINKINTRAW[1] correspond to USERPHYSEL0 and USERPHYSEL1, respectively. Writing a 1 will

clear the event and writing 0 has no effect.

Ethernet Media Access Controller (EMAC)/Management Data Input/Output (MDIO)72 SPRU975B – August 2006

Submit Documentation Feedback

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 147 148

Pas de commentaire

Texas-instruments TMS320C645x DSP Manuel d'utilisateur Page 72