Texas-instruments TMS320C645x DSP Manuel d'utilisateur télécharger pdf (Page 127)

www.ti.com

5.41 Receive Pause Timer Register (RXPAUSE)

EMAC Port Registers

The receive pause timer register (RXPAUSE) is shown in Figure 69 and described in Table 69 .

Figure 69. Receive Pause Timer Register (RXPAUSE)

31 16

Reserved

R-0

15 0

PAUSETIMER

R-0

LEGEND: R = Read only; - n = value after reset

Table 69. Receive Pause Timer Register (RXPAUSE) Field Descriptions

Bit Field Value Description

31-16 Reserved 0 Reserved

15-0 PAUSETIMER Receive pause timer value. These bits allow the contents of the receive pause timer to be

observed. The receive pause timer is loaded with FF00h when the EMAC sends an outgoing pause

frame (with pause time of FFFFh). The receive pause timer is decremented at slot time intervals. If

the receive pause timer decrements to 0, then another outgoing pause frame is sent and the

load/decrement process is repeated.

SPRU975B – August 2006 Ethernet Media Access Controller (EMAC)/Management Data Input/Output (MDIO) 127

Submit Documentation Feedback

1 2 ... 122 123 124 125 126 127 128 129 130 131 132 ... 147 148

Pas de commentaire

Texas-instruments TMS320C645x DSP Manuel d'utilisateur Page 127