Texas-instruments TMS320C645x DSP Manuel d'utilisateur télécharger pdf (Page 71)

www.ti.com

4.6 MDIO Link Status Change Interrupt (Unmasked) Register (LINKINTRAW)

MDIO Registers

The MDIO link status change interrupt (unmasked) register (LINKINTRAW) is shown in Figure 20 and

described in Table 19 .

Figure 20. MDIO Link Status Change Interrupt (Unmasked) Register (LINKINTRAW)

31 16

Reserved

R-0

15 2 1 0

Reserved LINKINTRAW

R-0 R/WC-0

LEGEND: R = Read only; R/WC = Read/Write 1 to clear; - n = value after reset

Table 19. MDIO Link Status Change Interrupt (Unmasked) Register (LINKINTRAW) Field

Descriptions

Bit Field Value Description

31-2 Reserved 0 Reserved

1-0 LINKINTRAW MDIO Link change event, raw value. When asserted, a bit indicates that there was an MDIO link

change event (i.e. change in the LINK register) corresponding to the PHY address in the

USERPHYSEL register. LINKINTRAW[0] and LINKINTRAW[1] correspond to USERPHYSEL0 and

USERPHYSEL1, respectively. Writing a 1 will clear the event and writing 0 has no effect.

SPRU975B – August 2006 Ethernet Media Access Controller (EMAC)/Management Data Input/Output (MDIO) 71

Submit Documentation Feedback

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 147 148

Pas de commentaire

Texas-instruments TMS320C645x DSP Manuel d'utilisateur Page 71